The filter softener for DVA 16LT water

The filter softener for DVA 16LT water

• Ion exchange. Volume 16 liters.
• Stainless steel case.
• Water flow rate 1000 l / h.
• Operating pressure 1-8 bar.
• Cranes 3 \ 4 inches.
• Filled with resin, completely ready to go.
• The amount of tar was 11.2 liters, the amount of salt for regeneration was 2 kg.
• Operating water temperature 4 - 25C.

Used together with ice makers, flow boilers, dishwashers, coffee makers for three groups, combi ovens, convection ovens with moisture, food boilers and other water heating equipment to extend the service of their heating elements.

• Dimensions 190x255x600mm.
• Weight 12kg.
• Manufacturer: DVA (Italy).

The principle of the filter softener is based on the ion exchange of hardness salts (calcium) for sodium ions. Together with water, hardness salts enter the tank, where the cation-exchange resin is located. When passing through a cation-exchange resin, hardness ions are replaced by sodium ions in the resin, providing softening of the water at the outlet of the tank.

CONNECTION TO WATER SUPPLY DVA FILTER:

• A tap should be installed between the water supply system and the water softener, with which you can, if necessary, shut off the flow of water and also a check valve to avoid back pressure.
• Connect the inlet and outlet hoses to the water softener and make sure that they are well tightened.